Omron FQ2-S/CH Series User Manual page 280

Save Measurement Data
Saves measurement data saved in the Sensor's memory by the logging function to the SD card inserted in the
Touch Finder as csv data.
The destination for measurement data is the following fixed directory on the SD card.
\Sensor name\LOGDATA
The file name is automatically created as follows.
YYYY_MM_DD-HH_mm_ss.csv
The date and time that make up the measurement data file name are not the date and time that the
measurement was performed, they are the date and time the measurement data file was saved from the
Sensor to the Touch Finder SD card by this command.
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Sensor)
First word of
command area
12 to 15
+2
+3
+4
:
+35
Response (Sensor to PLC)
First word of
response area
12 to 15
+2
+3
+4
+5
278
Command Control
Time that the measurement data was saved to the Touch Finder SD card
Date that the measurement data was saved to the Touch Finder SD card
Bits
8 to 11
0111 0000
0000 0000
0000 0000
: :
0000 0000
Bits
8 to 11
0111 0000
0000 0000
0000 0000
0000 0000
4 to 7 0 to 3
0000 0000
0111 0000
0000 0000
: :
0000 0000
4 to 7 0 to 3
0010 0000
0111 0000
0000 0000 Response code
0000 0000
Description
Command code
*1
File name (only when using the
PLC link communication protocol)
File name to save
64 characters max.
The file name extension (.csv) can
be omitted.
Description
Command code
The command code for which the
response applies is stored.
Command execution result
0: OK, FFFFFFFF: NG
FQ2-S/CH User's Manual
for Communications Settings