LASTIMAGESAVE or LIS
Saves the latest input image to the SD card inserted in the Touch Finder as ifz data.
The destination for image data is the following fixed directory on the SD card.
\Sensor name\CAPTURE
<Command Format>
L A S T I M
or
L I S
<Response Format>
When the Command Is Processed Normally
O
K
CR
Delimiter
When the Command Is Not Processed Normally
E
R
CR
Delimiter
<Parameter Descriptions>
Image data file name Specifies the image data file name to save. (64 characters max.)
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
366
Command Control
A
G E S A V E
C
R
Image data file name
Space (0x20)
The file name extension (.ifz) can be omitted.
C
R
Image data file name
Space (0x20)
FQ2-S/CH User's Manual
for Communications Settings