Omron FQ2-S/CH Series User Manual page 291

REGIMAGE or RID
Set a Registered Image
Sets the latest image or a specified logging image as a registered image.
Registered images are saved to the following directory on the SD card or PC Tool.
\Sensor name\REGIMAGE
The image specified as a registered image can be loaded as a measurement image with the Acquire
Registered Image command.
Acquire Registered Image p.319
A maximum of 1000 registered images (image registration number: 0 to 999) can be set.
* For the PC Tool, the data is saved in the "\..\My Documents\OMRON FQ\" folder.
<Command Format>
Command
R E G I M A
or
R I D
Command Registered
image number
(3 digits max.)
Space
(0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
*
Registered
image number
(3 digits max.)
G E
Space
(0x20)
Registration Logging
source image number
(1 digit max.) (2 digits max.)
Space Space
(0x20) (0x20)
Registration Logging
source image number
(1 digit max.) (2 digits max.)
CR
Space Space Delimiter
(0x20) (0x20)
CR
Delimiter
289
Command Control