Re-register Reference Values (Position Compensation Item)
This command re-registers the reference value for the specified position compensation item based on the
previously loaded image.
Command Format
MRC
SRC
(1 byte)
(1 byte)
28
0F
Response Format
MRC
SRC
(1 byte)
(1 byte)
28
0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Position compensation
item number
398
Command Control
Sensor command code (4
bytes)
00104031
MRES
SRES
(1 byte)
(1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the item number of the position compensation item that will have its model re-registered. (0 to 7)
Position compensation item num-
ber
(4 bytes)
Position compensation item num-
ber 0 to 7 (1 digit max.)
Sensor command code (4 bytes)
00104031
Description
FQ2-S/CH User's Manual
for Communications Settings