Omron FQ2-S/CH Series User Manual page 137

Signal
Command code Command code
Response code Response code
Response data Response data
 Output Area
Sensor (Slave) to PLC (Master)
First Bits
word
15 14 13 12
+0
+1
·
·
·
+14
+15
·
·
·
+128
+129
·
·
·
+512
+513
Signal
DATA0-255 Output data 0 to 255
Note
If the size of data that is output exceeds the set value of the number of output data upper value setting, the remain-
ing data will be discarded.
Output Order of Measurement Data and Output Characters: p. 25
FQ2-S/CH User's Manual
for Communications Settings
Signal name
This I/O port returns the command code that
was executed.
This I/O port contains the response code of the
executed command.
This I/O port contains the response data of the
executed command.
11 10 9 8
DATA 0
DATA 7
DATA 63
DATA 255
Signal name
These I/O ports output the output data that is
specified for the data output method.
The range of the data that can be output is
determined by the set value of the [Max output
data] (number of output data upper value)
parameter setting as follows:
Minimum setting (32 bytes): Output data 0 to 7
Default setting (256 bytes): Output data 0 to 63
Maximum setting (1,024 bytes): Output data 0
to 255
Controlling Operation and Outputting Data with PLC Link Communications
Function
7 6 5 4 3
·
·
·
·
·
·
·
·
·
Function
Application
Command/
response commu-
nications
Contents
2 1 0
Output data
0 (32 bits)
·
·
·
Output data
7 (32 bits)
·
·
·
Output data
63 (32 bits)
·
·
·
Output data
255 (32 bits)
Application
Data output after
measurements
135