Omron FQ2-S/CH Series User Manual page 114

Command code in
command area (hex)
+2 +3
5000 0020
7010 0020
7020 0020
8010 0020
8020 0020
8030 0020
F000 0020
 Commands to Write Data
Command code in
command area (hex)
+2 +3
1010 0050
1020 0050
1040 0050
2000 0050
4010 0050
4060 0050
7010 0030
7020 0030
8010 0030
8020 0030
112
Controlling Operation and Outputting Data with EtherNet/IP Communications
Command name
Get Latest Error Information
Acquire Communication Input
Status
Acquire Communication Out-
put Status
Acquire Terminal Status
Batch Acquire Terminal Status Batch acquires the ON/OFF status for the all
Batch Acquire IN Terminal Sta-
tus
Acquire Execution Mode
Command name
Set Image Adjustment Item
Data
Set Inspection Item Data
Set Camera Parameter
Set Date and Time
Set System Data
Set Terminal Offset Data
Set Communication Input Sta-
tus
Set Communication Output
Status
Set Terminal Status
Batch Set Terminal Status
Function
Acquires the Sensor's most recent error
code.
Acquires the input status (allowed/prohib-
ited) for the communications protocol set with
the Set Communication Input Status com-
mand.
Acquires the output status (allowed/prohib-
ited) for the communications protocol set with
the Set Communication Output Status com-
mand.
Acquires the ON/OFF status of the input sig-
nal for the specified parallel I/O terminal.
parallel I/O input terminals other than the IN
terminals.
Batch acquires the ON/OFF status for the IN
terminals.
Acquires the FQ2 execution status (execution
mode).
Function
Sets parameters for a position compensation
item or filter item.
Sets parameters for the specified inspection
item.
Sets the value for the specified camera
parameter.
Set the current date and time information.
Sets the value to the specified system data.
Sets the value of the terminal offset data that
is added to the IN0 to IN4 command parame-
ters
Sets the input status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all par-
allel I/O output terminals other than the D ter-
minals (D0 to D15).
Reference
p.239
p.240
p.241
p.242
p.243
p.244
p.245
Reference
p.246
p.248
p.249
p.258
p.250
p.251
p.252
p.253
p.253
p.255
FQ2-S/CH User's Manual
for Communications Settings