Omron FQ2-S/CH Series User Manual page 331

INPUTTRANSSTATE or ITS
Set Communication Input Status
This command sets the input status (allowed/prohibited) of the communications port for the specified
communications protocol.
Communications protocols with the input status set to prohibited will no longer receive communications after
being set as such.
However, for inputs related to hardware (parallel TRIG signal and DSA signal), this setting is not applicable.
<Command Format>
I N P U T T
Space Space
or (0x20) (0x20)
I T S
Command Communications
protocol
type to be set
(1 digit max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Communications protocol
type to be set
Setting value
FQ2-S/CH User's Manual
for Communications Settings
Command
R A N S S
Delimiter
CR
Setting value
(1 digit max.)
Specifies the type of communications protocol to be set.
0: No protocol (TCP, UDP, FINS)
1: No protocol (RS-232C)
2: Parallel I/O
3: Fieldbus
5: PLC link
Sets the status of the communications protocol.
0: Input prohibited status
1: Input allowed status
Communications protocol
type to be set
(1 digit max.)
T A T E
Space
(0x20)
Setting value
(1 digit max.)
CR
Space Delimiter
(0x20)
Command Control
329