Configuring A Hotline Time (With Hotline After Timeout Only) - Siemens Hicom 150 E User Manual

Hotline
Configuring a Hotline Time (with Hotline after Timeout
Only)
1.
2.
60
Prerequisite:
System administration has been started (
Check the display. Select " 21 Hotline" and con-
firm your selection or enter the prompted code.
Check the display. Select " 3 Hotline timeout" and
confirm your selection or enter the prompted
code.
or
2 1 3
Enter code.
From this point on, simply follow the user
prompts:
0 = Immediate connection setup
1... 99 = Connection setup after ... seconds.
Æ
20).