Driver's Air Bag Module - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

MAINTENANCE AND REPAIR

DRIVER'S AIR BAG MODULE

Removal and Installation
1. Disconnect the negative battery cable.
2. Place the steering wheel to straight ahead direction.
3. Remove the driver's air bag module bolts.
4. Disconnect the air bag module connector and the horn
connector and remove the air bag module.
5. Install in the reverse order of removal. Make sure to
connect each connector and tighten the bolts with the
specified tightening torque.
AIRBAG SYSTEM
REXTON SM - 2004.4
12-15
Y220_12011
Y220_12012
Y220_12013
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN