SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1702

BELT PRETENSIONER
Removal and Installation
Notice
1. Disconnect the negative battery cable and place the
ignition switch at "OFF".
2. Perform the preceding works before start this operation.
1. Remove the seat belt mounting bolts and B-pillar lower
trim assembly.
2. Disconnect the air bag connector.
3. Unscrew the belt pretensioner bolt and the seat belt upper
bolt and remove the seat belt assembly.
4. Install in the reverse order of removal. Make sure to tighten
the pretensioner bolt with the specified tightening torque.
AIRBAG SYSTEM
REXTON SM - 2004.4
12-19
Y220_12022
Y220_12023
Y220_12024
Y220_12025
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN