IGMP Snooping Commands
Command
ip igmp snooping
ip igmp snooping vlan static Adds an interface as a member of a multicast group
ip igmp snooping version
show ip igmp snooping
show mac-address-table
multicast
ip igmp snooping
Use this command to enable IGMP snooping on this switch. Use the no form to
disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Console(config)#ip igmp snooping
Console(config)#
ip igmp snooping vlan static
Use this command to add a port to a multicast group. Use the no form to remove the
port.
Syntax
[no] ip igmp snooping vlan vlan-id static ip-address interface
• vlan-id - VLAN ID (Range: 1-4094)
• ip-address - IP address for multicast group
• interface
- ethernet unit/port
- unit - This is device 1.
- port - Port number.
- port-channel channel-id (Range: 1-6)
Table 4-70. IGMP Snooping Commands
Function
Enables IGMP snooping
Configures the IGMP version for snooping
Shows the IGMP snooping and query configuration
Shows the IGMP snooping MAC multicast list
Multicast Filtering Commands
Mode
GC
GC
GC
PE
PE
4
Page
4-225
4-225
4-226
4-227
4-227
4-225