Appendix A: Specifications And Regulatory Compliance; Physical Specifications; Regulatory Compliance; Switch Specifications - Enterasys I Series Hardware Installation Manual

Specifications and Regulatory Compliance
This appendix provides operating specifications for the Enterasys I-Series switch.
Enterasys Networks reserves the right to change the specifications at any time without notice.
For information about...

Physical Specifications

Power Requirements
Environmental Requirements
IOM Port Specifications
Relay Specifications
Mini-GBIC Input/Output Specifications

Regulatory Compliance

Physical Specifications
The physical specifications for the I-Series switch and the IOMs are as follows:
Table A-1 Switch Specifications
Physical
Dimensions
Weight of chassis without any IOMs
Predicted hours for Mean Time Between
Failures (MTBF)
Specification
8.89 cm x 33.86 cm x 18.41 cm
(3.5 in. x 13.33 in. x 7.25 in.)
4.11 kg (9.05 lb)
Information about MTBF is located at
http://www.enterasys.com/support/mtbf.
Enterasys I-Series Hardware Installation Guide A-1
A
Refer to page...
A-1
A-3
A-3
A-3
A-5
A-5
A-7