Modify Shared Folder - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.8 NAS Management
The procedure to delete shred folders is as follows:
Procedure
1
Select the shared folder that is to be deleted (multiple selections can be made) and click
[Delete Shared Folder] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 Deletion of shared folder starts.
3
Click the [Done] button to return to the [NAS] screen.
4.8.3

Modify Shared Folder

This function changes the shared folder settings.
Specify the access protocols and hosts which are allowed or denied access to each shared folder.
This function is used in a Unified Storage environment.
• An error occurs when the total number of input characters exceeds the maximum (5120 characters).
Confirm the used characters when this error occurs even if the total of input characters does not exceed
the maximum. Note that a double quotation (0x22) and a single quotation (0x27) are regarded as being
two characters.
• If the shared folder modification has not been completed successfully, wait for the ETERNUS DX S3 series
status to return to normal and then try again.
This function can change the following items; "Writable", "Oplocks", "Owner", "Group", "CIFS Allowed Hosts",
"CIFS Denied Hosts", and "NFS Allowed Hosts".
For details on the parameters for this function, refer to
The procedure to change the shred folder settings is as follows:
Procedure
1
Select the shared folder that is to be changed and click [Modify Shared Folder] in [Action].
506
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.4.7.2 Modify Shared Folder" (page
End of procedure
887).
P2X0-1270-13ENZ0