Fujitsu ETERNUS DX60 S3 User Manual page 419

Chapter 4 Connectivity Management
4.2 Host Group Management
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
•
(4)
Click the [OK] button
 Returns to the [Manual Input] screen.
(5)
Repeat
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
(6)
After registering the SAS host is complete, click the [Add] button.
 A confirmation screen appears.
3
Click the [OK] button.
 Registration of the SAS host starts.
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" is already used for the registration target host
The "SAS Address" is not entered
The "SAS Address" does not satisfy the input conditions
The "SAS Address" is already used for the registration target host
Step (2) through Step (4)
The same "Name" is already used in the ETERNUS DX
The same "SAS Address" is already used in the ETERNUS DX
The number of hosts that is to be registered is "0"
The number of registered hosts has exceeded the maximum number for the ETERNUS DX
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
when registering several SAS hosts.
419
P2X0-1270-13ENZ0