Stop Balancing Flexible Tier Pool - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 6 Thin Provisioning Pool Management

6.12 Stop Balancing Flexible Tier Pool

6.12 Stop Balancing Flexible Tier Pool
This function stops Flexible Tier Pool (FTRP) balancing sessions.
• This function cannot be used when no FTRPs are undergoing balancing or when no FTRP balancing that
has stopped due to an error exists.
• This function cannot be used when the specified FTRP balancing is already complete.
If FTRP balancing has stopped, the following conditions apply.
• All of the balancing sessions that are currently being performed (*1) for the FTVs registered in the target
FTRP are stopped. Even when balancing sessions are being stopped, FTVs that are not being balanced can
be accessed normally.
• Note that completed balancing processes for the FTVs in the target FTRP (*1) cannot be stopped (the
physical allocation after the balancing process cannot be changed). FTVs that are balanced can be
accessed normally.
*1: When an FTRP balancing session is started, FTV balancing starts in the FTSPs. Refer to
Flexible Tier Pool" (page 587)
The procedure to stop balancing FTRP is as follows:
Procedure
1
Select the FTRP for which balancing is to be stopped and click [Stop Balancing FTRP] in
[Action].
 A confirmation screen appears.
2
Click the [OK] button.
 FTRP balancing stops.
3
Click the [Done] button to return to the [Flexible Tier Pool] screen.
for details.
589
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"6.11 Start Balancing
End of procedure
P2X0-1270-13ENZ0