Notes for Using ETERNUS Web GUI
Note the following points when using ETERNUS Web GUI:
•
If the PC and the ETERNUS DX belong to a different network and the transfer rate setting for each network
does not match, the retransmission of packets occurs more frequently and the operation screen for
ETERNUS Web GUI may take more time to be displayed.
By setting the same transfer rate for each network (adjusted to the lowest of the transfer rates), the
retransmission of packets can be reduced. Note the following points when setting the transfer rate:
-
Set the same transfer rate for each network
-
When the transfer rate for the ETERNUS DX is not "Auto-negotiation", the same transfer rate must also
be set for the network switches
•
Do not use the standard buttons of each browser (for example, the [Back] button, the [Forward] button,
and the [Refresh] button), the [F5] (refresh) key, or the [Back Space] (back) key.
Operating Environment
The following PC environment is required to use ETERNUS Web GUI.
Web browser
Display resolution
Confirmed operating environment
Microsoft Internet Explorer
Mozilla Firefox
•
1024 × 768 or more
•
24-bit color or more is recommended
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Notes for ETERNUS Web GUI
7.0, 8.0, 9.0, 10.0 (desktop version),
11.0 (desktop version)
3.6.x, ESR 10.0.x, ESR 17.0.x, ESR 24.0.x
–
10
Version
P2X0-1270-13ENZ0