Chapter 1 System Management
1.8 Network Management
The authentication and encryption can be enabled/disabled, and also the MIB access range can be specified,
for each user.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to set the user to access the SNMP Agent is as follows:
Procedure
1
Click [Setup SNMP User] in [Action].
2
When adding a user, click the [Add] button. Click the [User Name] link to edit the user.
To delete the existing user, click the [Delete] button for the target user.
The [Setup SNMP Agent User] screen appears.
118
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.7.6 Setup SNMP Agent User" (page
"Appendix B Setup SNMP Agent User" (page
713).
981).
P2X0-1270-13ENZ0