Chapter 1 System Management
1.11 Key Management
2
Click the [Browse...] button to specify the path to the "SSL/KMIP Certificate File".
The main setting item is as follows.
●
SSL/KMIP Certificate Setting
•
SSL/KMIP Certificate File
If an error screen appears under the following conditions, check the parameter settings.
•
When reading of the "SSL / KMIP Certificate" failed
•
When the "SSL / KMIP Certificate" file is larger than 4096 bytes
3
Click the [Import] button.
A confirmation screen appears.
When the imported file was not the "SSL/KMIP Certificate File", an error screen appears. If this occurs,
check the parameter settings.
4
Click the [OK] button.
Importing of the SSL/KMIP certificate starts.
5
Click the [Done] button to return to the [Key Group] screen.
179
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0