Appendix A Parameter List
A.3 Volume Management
A.3.9
Set ALUA
For details about this function, refer to
For the factory default settings for this function, refer to
●
ALUA Settings
•
New ALUA
Description
A.3.10
Set Volume QoS
For details about this function, refer to
For the factory default settings for this function, refer to
●
Volume QoS Setting
•
New Bandwidth Limit
Description
Input condition/
Display contents
"3.17 Set ALUA" (page
Select the ALUA (access type from the host to the volume) that is specified for volumes.
•
Follow Host Response
Use the same "Asymmetric / Symmetric Logical Unit Access" setting as the host
response for the host group or the host.
•
ACTIVE / ACTIVE
If multiple paths are used to access the volume, use all of the paths with the same
priority.
•
ACTIVE-ACTIVE / PREFERRED_PATH
If multiple paths access the volume, use the recommended paths. Even though
volumes can be accessed by non-recommended paths, the responses to the host
may require a longer period of time.
"3.18 Set Volume QoS" (page
Select a new bandwidth limit.
•
Unlimited
•
15000 IOPS (800 MB/s)
•
12600 IOPS (700 MB/s)
•
10020 IOPS (600 MB/s)
•
7500 IOPS (500 MB/s)
•
5040 IOPS (400 MB/s)
•
3000 IOPS (300 MB/s)
•
1020 IOPS (200 MB/s)
•
780 IOPS (100 MB/s)
•
600 IOPS (70 MB/s)
•
420 IOPS (40 MB/s)
•
300 IOPS (25 MB/s)
•
240 IOPS (20 MB/s)
•
180 IOPS (15 MB/s)
•
120 IOPS (10 MB/s)
•
60 IOPS (5 MB/s)
813
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
323).
"Appendix B Set ALUA" (page
325).
"Appendix B Set Volume QoS" (page
991).
991).
P2X0-1270-13ENZ0