Chapter 1 System Management
1.11 Key Management
2
Click the [OK] button.
Deleting of the key server starts.
3
Click the [Done] button to return to the [Key Management] screen.
1.11.4
Modify Key Server
This function changes the key server settings.
•
Key server settings that are allocated to a key group can be changed.
•
This function can be used to change "Domain Name / IP Address", "Port No.", and "LAN Port".
•
This function can be used even when operations are being performed for the volumes that configures a
key management target RAID group.
For details on the parameters for this function, refer to
The procedure to change the key server settings is as follows:
Procedure
1
Select the key server that is to be changed and click [Modify Key Server] in [Action].
170
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.10.3 Modify Key Server" (page
End of procedure
753).
P2X0-1270-13ENZ0