Fujitsu ETERNUS DX60 S3 User Manual page 440

Chapter 4 Connectivity Management
4.3 CA Port Group Management
The procedure to modify a CA port group is as follows:
Procedure
1
Select the CA port group to be changed, and click [Modify Port Group] in [Action].
2
Specify the new name and add a port to the CA port group (select the checkbox) or delete a
port from the CA port group (clear the checkbox).
The main setting items are as follows.
●
CA Port Group Setting
• Name
• Checkbox to select ports
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" overlaps with an existing port group name (port group names cannot overlap with any
other port group names, irrespective of the CA types.)
• The total number of port groups has exceeded the maximum number for the ETERNUS DX
• Nine or more ports are registered in the port group or no ports are registered in the port group
• Ports with the affinity mode enabled (On) and disabled (Off) exist together
Ports that satisfy all of the following conditions are displayed.
• "FC", "iSCSI", "SAS", or "FCoE" type CA ports (the same type as the selected CA port group)
• The port mode is "CA" or "CA/RA (when the type is FC or iSCSI)"
• Not used for the Storage Cluster function
440
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0