B.2 Volume Management - Fujitsu ETERNUS DX60 S3 User Manual

Appendix B Factory Default List

B.2 Volume Management

B.2 Volume Management
This section provides information on the default parameters of the following actions for volume management.
• Create Volume
• Rename Volume
• Modify Thin Provisioning Volume Threshold
• Set Allocation
• Start RAID Migration
• Modify Cache Parameters
• Set ALUA
• Set Volume QoS
• Set Snapshot
■ Create Volume
Screen
New Volume
Automatic Setting
Manual Setting (When creat-
ing Standard, SDV, or SDPV
type volumes)
Manual Setting (When
creating TPV or NAS type
volumes)
Manual Setting (When
creating WSV type volumes)
Setting item
Allocation
NAS FS Block Size
RAID Group/TPP Selection
Data Integrity
Drive Type
RAID Level
Key Group
Number of Volumes
Encryption by CM
Use all Largest Free Space
"Enable" checkbox
Volume No.
"Set Value" checkbox
Encryption by CM
Volume No.
"Set Value" checkbox
Volume Information
Use all Largest Free Space
"Enable" checkbox
Volume No.
"Set Value" checkbox
Wide Stripe Size
Concatenation Order
Encryption by CM
988
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
Thin
256 KB
Automatic
Default
Online (*1)
High Performance (RAID1+0) (*1)
Enable
•
If the volume is not "NAS Volume"
0
•
For "NAS Volumes"
1 (fixed)
Off
Cleared
Cleared
Off
Cleared
Cleared
Cleared
Normal
Automatic
Off
P2X0-1270-13ENZ0