Fujitsu ETERNUS DX60 S3 User Manual page 155

Chapter 1 System Management
1.9 Event/Dump Management
2-5
Save the log file.
The default file name is "Log_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss_serial
number for log file.zlg". (YYYY-MM-DD_hh-mm-ss: the date and time when the download screen
(Step
name and numbered serially (01 -).)
When exporting segmented log files, make sure to export the segment within five minutes. If five
minutes pass before exporting the next segment, the log export fails. After finishing saving each
segment, save the following segment immediately.
 If the log file is segmented, download and save the next segment (save all the segmented files).
3
Export the CM#0 NAS Engine log.
3-1
Click the [Export] button.
 A confirmation screen appears.
3-2
Click the [OK] button.
 Log export starts. The progress screen is displayed.
2-4) is displayed. When a log file is segmented, the segmented log files are given the same
After the log export is finished, a screen to execute downloading the file is displayed.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
155
P2X0-1270-13ENZ0