Chapter 1 System Management
1.12 Storage Migration Management
1.12.3
Delete Storage Migration Path
This function deletes path groups for Storage Migration.
The path groups must be deleted after the data migration is complete. The following operations are not
available before path groups are deleted:
•
Hot controller firmware upgrade is being performed in the destination storage system
•
Eco-mode schedule setting of the RAID group to which the destination volume belongs
•
Eco-mode schedule setting of the Thin Provisioning Pool (TPP) to which the destination volume belongs
•
Capacity expansion of the RAID group to which the destination volume belongs
•
RAID migration of the destination volume
•
Encryption of the destination volume
•
Capacity expansion of the destination volume
•
Deletion of the destination volume
•
Port mode modification of the destination FC-Initiator port
•
Port parameter setting of the destination FC-Initiator port
•
Reduction of the CA to which the destination FC-Initiator port belongs
The path group can be deleted if all configured paths are in any of the following states:
•
"Source LUN Status" of the Storage Migration Volume List is "
•
"Migration Status" of the Storage Migration is "Normal End", "Stop", "Initial", or "Waiting".
The procedure to delete the Storage Migration path is as follows:
Procedure
1
Select the path group that is to be deleted (multiple selections can be made) and click
[Delete Path] in [Action].
A confirmation screen appears.
2
Click the [OK] button.
Deletion of the Storage Migration path starts.
3
Click the [Done] button to return to the [Storage Migration] screen.
187
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Not Exist".
End of procedure
P2X0-1270-13ENZ0