Fujitsu ETERNUS DX60 S3 User Manual page 426

Chapter 4 Connectivity Management
4.2 Host Group Management
The main setting items are as follows.
●
iSCSI Host Setting
• Name
• iSCSI Name
• Host Response
• IP Version
• IP Address
• Alias Name
• CHAP User ID
• Change CHAP Password
• CHAP Password
• Confirm CHAP Password
• The range of LUNs that can be recognized from the host are determined by the "LUN Addressing"
settings and the "LUN Expand Mode (Peripheral Device Addressing)" settings for the host
response. Before changing a host response, check the LUN setting state. If LUNs that are LUN#256
onward are used, the recognizable LUN setting cannot be changed to a "256 LUN" host response.
Refer to
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3
Click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Changing of the iSCSI host information starts.
"Host responses and recognizable LUNs" (page 818)
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" already exists
The "iSCSI Name" is not entered
The "iSCSI Name" does not satisfy the input conditions
The "IP Address" does not satisfy the input conditions
Several iSCSI hosts with the same "IP Address" and "iSCSI Name" are already configured
Several iSCSI hosts without any entered IP addresses are specified with the same "iSCSI Name"
The "Alias Name" does not satisfy the input conditions
The "Alias Name" overlaps the existing Alias name
The "CHAP User ID" does not satisfy the input conditions
The "CHAP Password" does not satisfy the input conditions
The "Confirm CHAP Password" does not satisfy the input conditions
Either of the "CHAP User ID" or the "CHAP Password" has been specified
The "CHAP Password" and the "Confirm CHAP Password" do not match
There are some LUNs that cannot be recognized from the iSCSI host because the "Host
Response" setting has been changed (only for iSCSI hosts that are not registered in a host
group)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
426
for details.
P2X0-1270-13ENZ0