Fujitsu ETERNUS DX60 S3 User Manual page 456

Chapter 4 Connectivity Management
4.3 CA Port Group Management
■ Setting FCoE Port Parameters Manually
The procedure to set FCoE port parameters is as follows:
Procedure
1
Select the FCoE port to set the parameters for (multiple selections can be made) and click
[Configure FCoE Port] in [Action].
Multiple ports can be set with the same or with different parameters in a single operation. To set
parameters to multiple ports, select the target ports and specify the parameters for each port. After
the specification is complete, click the [Modify] button.
2
Set the parameters for all of the selected ports.
The main setting items are as follows.
●
Port Settings
• Port
• Transfer Rate (Gbit/s)
• Set VLAN ID
• VLAN ID
• Set Fabric Name
• Fabric Name
• Frame Size
If some parameters do not satisfy the input conditions, an error screen appears. If this occurs, check
the parameter settings.
456
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0