Chapter 3 Volume Management
3.5 Expand Volume
For the "Drive Type" field, the type of drive that configures the RAID group is displayed.
If multiple drive types are used in the RAID group, the drive type is displayed as described below:
•
If only "Online" type drives are used or if both "Online" and "Nearline" type drives are used, "Online"
is displayed.
•
If only "Online SED" type drives are used or if both "Online SED" and "Nearline SED" type drives are
used, "Online SED" is displayed.
•
If a single SSD type (SSD-M/SSD) is used or if multiple SSD types (SSD-M/SSD) are used, "SSD" is
displayed.
4
Click the [OK] button.
Returns to the [Expand Volume] screen.
5
Repeat
completing these settings, click the [Expand] button.
A confirmation screen appears.
6
Click the [OK] button.
Expansion of a volume starts.
7
Click the [Done] button to return to the [Volume] screen.
Step 2
through
Step 4
to select RAID groups and specify the capacity. After
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
282
End of procedure
P2X0-1270-13ENZ0