Fujitsu ETERNUS DX60 S3 User Manual page 873

Appendix A Parameter List
A.4 Connectivity Management
• NACA
Description
Input condition/
Display contents
• Device ID Type
Description
Input condition/
Display contents
• Product ID
Description
Input condition/
Display contents
●
Test Unit Ready Command Settings
• Reservation Conflict Response
Description
Input condition/
Display contents
●
Sense Settings
• Notify Change of Volume Mapping
Description
Input condition/
Display contents
• Notify Change of Volume Expansion
Description
Input condition/
Display contents
Select "Enable" or "Disable (Default)" for the Normal Auto Contingent Allegiance (NACA)
bit.
•
Enable
•
Disable (Default)
Select the format of the volume identification information.
•
Type3 (Default)
•
Type1
•
Type1 + Type3
Select "Default" or "Respond as ETERNUS DX S2" for the product ID that is responded to
the host.
•
Default
•
Respond as ETERNUS DX S2
Select the response status when a command to the volume is received while the relevant
volume is reserved by another host.
•
GOOD (Default)
•
RESERVATION CONFLICT
Select whether the host is notified ("Enable (Default)") or not notified ("Disable") when
volume mapping is changed.
•
Enable (Default)
•
Disable
Select the host is notified ("Enable (Default)") or not notified ("Disable") when the
volume capacity is changed.
•
Enable (Default)
•
Disable
873
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0