Fujitsu ETERNUS DX60 S3 User Manual page 110

Chapter 1 System Management
1.8 Network Management
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to set a firewall is as follows:
Procedure
1
Select which port to set the firewall for (multiple selections can be made) and click [Setup
Firewall] in [Action].
2
Specify whether to enable or disable the connection of each service.
The main setting items are as follows.
●
Firewall Settings
• HTTP
• HTTPS
• Telnet
• SSH
• ICMP
• Maintenance-Secure
• SNMP
• RCIL
• ETERNUS DX Discovery
3
Click the [Set] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Setting of the firewall starts.
110
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.7.2 Setup Firewall" (page
"Appendix B Setup Firewall" (page
708).
980).
P2X0-1270-13ENZ0