Fujitsu ETERNUS DX60 S3 User Manual page 737

Disk storage systems

Hide thumbs Also See for ETERNUS DX60 S3:

Table of Contents

Appendix A Parameter List

A.1 System Management

Informational Level

Select whether to notify of an informational event for each event type.

The input conditions and the display contents for the informational level are as follows:

Input condition/

Display contents

Recovery module

Temperature restoration

User login/logout

Operated RAID Group

Added/Released Hot Spare

Operated Volume

Power off/on Apply Firmware

Not applicable to notification

Select whether to notify when the failed part is recovered by taking actions such as

replacement. When notifying, select the notification method.

Select whether to notify when a temperature error or warning status is recovered to the

normal status. When notifying, select the notification method.

Select whether to notify when a user login/logout is detected. When notifying, select the

notification method.

Select whether to notify when the RAID group is created or deleted. When notifying,

select the notification method.

Select whether to notify when the hot spare disk is registered or released. When

notifying, select the notification method.

Select whether to notify when the volume is created or deleted. When notifying, select

the notification method.

Select whether to notify when the ETERNUS DX is turned off/on or when the hot

controller firmware upgrade is performed. When notifying, select the notification

ETERNUS Web GUI User's Guide (Settings)

P2X0-1270-13ENZ0

Show Quick Links

Table of Contents