Fujitsu ETERNUS DX60 S3 User Manual page 183

Chapter 1 System Management
1.12 Storage Migration Management
The procedure to start Storage Migration is as follows:
Procedure
1
Click [Start] in [Action].
2
Click the [Browse...] button to select a Storage Migration setting file.
The main setting item is as follows.
●
Storage Migration
• Storage migration setting file
• An error screen is displayed when a timeout occurs during the retrieval of destination device
information.
• An error screen is displayed when the Storage Migration setting file is in the following conditions:
-
-
-
-
-
-
-
The Storage Migration setting file is not specified
A character code other than the space or tab is placed before the keyword on the left of "="
The number of the parameters on the right of "=" does not coincided with the specified number
of parameters of the keyword
The identification code is invalid
"Type" is not "Open"
The "GROUP" is in the following conditions
• Invalid characters are input
- A value other than a 1-digit hexadecimal number is input after the "0x" prefix
• Out of range (not in the 0 - F range)
• The same value is duplicated in the Storage Migration setting file
The Operation mode is not one of the following items: "M", "M+QC", "M+FC", "QC", "FC"
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
183
P2X0-1270-13ENZ0