Fujitsu ETERNUS DX60 S3 User Manual page 221

Chapter 1 System Management
1.15 Firmware Management
7
Click the [Apply] button.
 A confirmation screen appears.
"Update" or "Update & Reboot" is displayed as the application mode. Which one is displayed depends
on the storage system status. If "Update & Reboot" is displayed and the [Apply] button is clicked, the
ETERNUS DX automatically reboots after the controller firmware is applied.
Click the [Rediscovery] button to display the latest information, the application mode, and the status
check result.
8
Click the [OK] button.
Never turn off the ETERNUS DX while controller firmware is being applied. Wait until the application of
the controller firmware is complete.
■ When the application mode is "Update"
■ When the application mode is "Update & Reboot"
 Application of the controller firmware starts.
221
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0