Fujitsu ETERNUS DX60 S3 User Manual page 514

Chapter 4 Connectivity Management
4.8 NAS Management
To delete the DNS server settings, clear the setting fields and complete the setup.
For details on the parameters for this function, refer to
The procedure to set the DNS server that is used for the NAS system is as follows:
Procedure
1
Click [Set DNS Server] in [Action].
2
Specify parameters.
The main setting items are as follows.
●
DNS Server Settings
• Primary IP Address
• Secondary IP Address
• IPv6 Primary IP Address
• IPv6 Secondary IP Address
If an error screen appears under the following conditions, check the parameter settings.
• Each parameter fails to satisfy the input conditions
• The same IPv4 address is specified for the primary IP address and the secondary IP address
• The same IPv6 address is specified for the IPv6 primary IP address and the IPv6 secondary IP
address
• The secondary IP address is specified but the primary IP address is set with a blank field
• The IPv6 secondary IP address is specified but the IPv6 primary IP address is set with a blank field
3
Click the [Set] button.
 A confirmation screen appears.
514
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.4.7.6 Set DNS Server" (page 895).
P2X0-1270-13ENZ0