Fujitsu ETERNUS DX60 S3 User Manual page 147

Chapter 1 System Management
1.9 Event/Dump Management
■ Informational Level
• The following events have been changed from "
Level" in the [Setup Event Notification] function of the controller firmware version V10L30 or later.
-
-
• If the controller firmware version is updated from V10L2x to V10L30 or later, the event notification
settings (whether to notify and the notification method) that were set in V10L2x are retained.
• Threshold of SDP usage can be specified using the procedure in
(page
• Threshold of copy table size usage can be specified using the procedure in
Size" (page
• If free space of an ODX Buffer volume is insufficient, expand the volume capacity. For details, refer
to the following sections:
- "3.5 Expand Volume" (page 278)
- "3.7.1 Expand Thin Provisioning Volume" (page 285)
- "3.9 Start RAID Migration" (page 301)
3
Click the [Set] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Setting of the event notification starts.
5
Click the [Done] button to return to the [Event/Dump] screen.
Automatic Change Storage Cluster Active/Standby State
Manual Change Storage Cluster Active/Standby State
608).
602).
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Error Severity Level" to "
147
Informational
"7.7 Modify Copy Parameters"
"7.6 Modify Copy Table
End of procedure
P2X0-1270-13ENZ0