Fujitsu ETERNUS DX60 S3 User Manual page 704

Appendix A Parameter List
A.1 System Management
• Slave IP Address
Description
Input condition/
Display contents
• Subnet Mask
Description
Input condition/
Display contents
• Gateway
Description
Input condition/
Display contents
This item is not displayed when an FST port is selected.
●
DNS
• Primary DNS
Description
Input condition/
Display contents
This item is not displayed when an FST port is selected.
• Secondary DNS
Description
Input condition/
Display contents
•
This item is not displayed when an FST port is selected.
•
The Secondary DNS server must be specified after the Primary DNS server.
Input the IP address for the Slave CM of the ETERNUS DX.
The IP address of the Slave CM is used when an error occurs in the Master CM.
This item is not displayed for the 1CM model.
•
Numeric characters
•
0 - 255
Input the subnet mask of the ETERNUS DX.
•
Numeric characters
•
255.0.0.0 - 255.255.255.252
Input the IP address of the gateway.
•
Numeric characters
•
0 - 255
Input the IP address of the Primary DNS server that is used for the management LAN.
•
Numeric characters
•
0 - 255
Input the IP address of the Secondary DNS server that is used for the management LAN.
•
Numeric characters
•
0 - 255
704
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0