Change User Password - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management

1.2 Change User Password

1.2 Change User Password
This function changes the current user's (your) password.
When RADIUS Authentication is used for login, the password cannot be changed.
For details on the parameters for this function, refer to
The procedure to change the password is as follows:
Procedure
1
Click [Change User Password] in [Action].
2
Specify the parameters.
The main setting items are as follows.
●
Password Setting
• Old Password
• New Password
• Confirm New Password
If an error screen appears under the following conditions, check the parameter settings.
• Each parameter is not entered
• Each parameter fails to satisfy the input conditions
• The old password is different from the current password
• "New Password" does not match "Confirm New Password"
28
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.1 Change User Password" (page 666).
P2X0-1270-13ENZ0