A.7.6 Measure Round Trip Time - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.7 Advanced Copy Management
A.7.6 Measure Round Trip Time
For details about this function, refer to
●
Measure Round Trip Time
• Round Trip Time
Description
Input condition/
Display contents
A.7.7 Modify REC Buffer
For details about this function, refer to
For the factory default settings for this function, refer to
●
REC Buffer Setting List
• Usage
Description
Input condition/
Display contents
• Remote Box ID
Description
Input condition/
Display contents
"7.8.5 Measure Round Trip Time" (page
The round trip time (msec) measurement result between the source device and the
remote storage system is displayed.
If a measurement error has occurred, the field is blank. The value can be changed. The
following describes the recommended round trip time.
•
Asynchronous copy
within 100 msec.
•
Synchronous copy
within 50 msec.
Numeric characters between 1 - 65535 (decimal)
"7.8.6 Modify REC Buffer" (page
Specify the usage of the REC Buffer.
When setting the REC Buffer for sending, select "Send". When setting the REC Buffer for
receiving, select "Receive". To delete the REC Buffer, select "Unused".
•
Send
•
Receive
•
Unused
Select the Box ID for the remote storage system.
If the copy path information is deleted after the REC Buffer creation, "???" is displayed.
Note that REC Buffers with "???" cannot be used. Delete any REC Buffers with this status.
If "Unused" is selected for the usage, "-" (hyphen) is displayed.
•
Remote storage System Box ID
•
"-" (hyphen)
958
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
639).
641).
"Appendix B Modify REC Buffer" (page 1011).
P2X0-1270-13ENZ0