Fujitsu ETERNUS DX60 S3 User Manual page 475

Chapter 4 Connectivity Management
4.5 Host Response Management
• Assign a host response when adding or changing a host group. Refer to the following functions:
- "4.2.1 Add FC/FCoE Host Group" (page 365)
- "4.2.2 Add iSCSI Host Group" (page 372)
- "4.2.3 Add SAS Host Group" (page 379)
- "4.2.5 Modify Host Group" (page 385)
• Assign a host response when adding or changing a host. Refer to the following functions:
- "4.2.9 Add FC/FCoE Host" (page 405)
- "4.2.10 Add iSCSI Host" (page 410)
- "4.2.11 Add SAS Host" (page 416)
- "4.2.15 Modify FC/FCoE Host" (page 423)
- "4.2.16 Modify iSCSI Host" (page 425)
- "4.2.17 Modify SAS Host" (page 427)
• Refer to "4.5.1 Add Host Response" (page 471)
Requirements for changing parameters
Some parameters that allow online modification can be changed during operation. If parameters that do not
allow online modifications are changed, the server may need to be rebooted after these parameters are
changed.
Category
Host Response Name
LUN Settings
ALUA Settings
Inquiry Command Settings
Test Unit Ready Command
Settings
Sense Settings
to add a new host response.
Parameter
Name
LUN Addressing
LUN Expand Mode
(Peripheral Device Addressing)
Asymmetric / Symmetric Logical
Unit Access
TPGS Mode
TPG Referrals Mode
Peripheral Device Type
(Peripheral Device Addressing)
Peripheral Device Type
(Flat Space Addressing)
SCSI Version
NACA
Device ID Type
Product ID
Reservation Conflict Response
Notify Change of Volume Mapping
Notify Change of Volume
Expansion
Notify Vendor Unique Sense
Sense Data Conversion
475
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Online modification is Online modification is
available
Available
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Available
Available
Available
Available
Available
not available
N/A
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
N/A
N/A
N/A
N/A
N/A
P2X0-1270-13ENZ0