Restart Storage Migration - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.12 Storage Migration Management
1.12.5

Restart Storage Migration

This function restarts Storage Migration when it is suspended, stopped, or error-stopped.
• Storage Migration is restarted in volume units.
• Storage Migration can be restarted when its "Migration Status" is "Suspend", "Stop" or "Error".
• If Storage Migration is restarted when its "Migration Status" is "Suspend" or "Error", data migration is
started from the point of LUN suspension.
• If Storage Migration is restarted when its "Migration Status" is "Stop", data migration of the LUN is started
over from scratch.
The procedure to restart the Storage Migration is as follows:
Procedure
1
Select the source LUN from which Storage Migration is to be restarted (multiple selections
can be made) and click [Restart] in [Action].
[Restart] cannot be clicked if one or more source LUNs are selected for which the migration status is
unavailable for restarting.
 A confirmation screen appears.
2
Click the [OK] button.
Note that if the migration status of some LUNs changes to unavailable status after clicking [Restart],
only the available LUNs among the selected LUNs are restarted. If LUNs for which the migration status
is not unavailable for restarting exist, a message that indicates that the restarting process for these
LUNs failed is displayed.
 Storage Migration restarts.
3
Click the [Done] button to return to the [Path Group Detail Information] screen.
189
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0