Fujitsu ETERNUS DX60 S3 User Manual page 457

Chapter 4 Connectivity Management
4.3 CA Port Group Management
3
Click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Modification of the FCoE port parameters starts.
5
Click the [Done] button to return to the [FCoE Port] screen.
■ Copying FCoE Port Parameters
The procedure to copy FCoE port parameters is as follows:
Procedure
1
Select which FCoE ports to set the parameters for (multiple selections must be made) and
click [Configure FCoE Port] in [Action].
2
Set the copy source port parameters and then click the [Copy] button.
 The [Copy Settings] screen appears.
457
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0