A.4 Connectivity Management - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List

A.4 Connectivity Management

A.4 Connectivity Management
This section provides information on the parameters of the following actions for connectivity management.
• Host Affinity Management
• Host Group Management
• CA Port Group Management
• LUN Group Management
• Host Response Management
• Host-LU QoS Management
• NAS Management
A.4.1 Host Affinity Management
A.4.1.1 Create Host Affinity
For details about this function, refer to
For the factory default settings for this function, refer to
●
Target Connection Setting
• Target Connection
Description
Input condition/
Display contents
●
Select CA Port
• Checkbox to select a CA port
Description
Input condition/
Display contents
"4.1.1 Create Host Affinity" (page
Select the connection target from "Host Group - CA Port Group" or "Host - CA Port".
•
Host Group - CA Port Group
Specify a "Host Group", a "CA Port Group", and a "LUN Group" to create a host affinity.
•
Host - CA Port
Specify a "Host", a "CA Port", and a "LUN Group" to create a host affinity.
To enable the paths between hosts and ports, select the port checkboxes. To disable the
paths, clear the checkboxes.
Select this item only when the connection target is "Host Group - CA Port Group".
Checkbox
•
Selected
•
Cleared
816
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
338).
"Appendix B Create Host Affinity" (page 993).
P2X0-1270-13ENZ0