Fujitsu ETERNUS DX60 S3 User Manual page 854

Appendix A Parameter List
A.4 Connectivity Management
- iSNS Server Port No.
Description
Input condition/
Display contents
This item is displayed when the port mode is "CA" or "CA/RA".
- VLAN ID
Description
Input condition/
Display contents
•
When specifying the VLAN ID, confirm the VLAN setting values of the LAN switch and the VLAN tagging
configuration of the server LAN card.
•
This item is not displayed when the port type is "iSCSI RA (for older storage system connection)".
- Jumbo Frame
Description
Input condition/
Display contents
•
This item is displayed only when the port mode is "CA".
•
The same iSCSI name cannot be set to multiple iSCSI ports except the device iSCSI name.
When "iSNS Server" for the target port is "IPv4" or "IPv6", input the port number of the
iSNS server.
Click the [Default] button to set the default iSNS server port number.
0 - 65535
Select whether to "Enable" or "Disable" the VLAN ID for the target port.
When "Enable" is selected, input the VLAN ID.
•
Enable
Specify the VLAN ID between 0 and 4095
•
Disable
Select whether to "Enable" or "Disable" the Jumbo Frame.
Select "Enable" when using the Jumbo Frame to transfer data via the target port.
When not using the Jumbo Frame, select "Disable".
Enabling Jumbo Frame increases the amount of data to be transferred per Frame,
making data transfer more efficient.
Confirm that the connected device (*1) supports the Jumbo Frame before enabling
the Jumbo Frame.
*1: When the ETERNUS DX and server are connected directly, this indicates that
the connected device is a server side LAN card (NIC). When the ETERNUS DX
and server are connected via a switch, this indicates that the connected device
is a switch.
•
Enable
•
Disable
854
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0