Chapter 1 System Management
1.5 Utility Management
2
Specify the interval.
The main setting item is as follows.
●
Performance Monitoring
•
Interval (sec.)
3
Click the [Start] button.
A confirmation screen appears.
4
Click the [OK] button.
Acquisition of performance information starts.
5
Click the [Done] button to return to the [Utility] screen.
■
Stopping performance monitoring
The [Stop] button is displayed when "Monitoring State" is "Active".
Procedure
1
Click [Start/Stop Perfmon] in [Action].
If the [Stop] button is clicked after starting performance monitoring from other monitoring software,
an error screen is displayed.
70
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0