A.4.2 Host Group Management - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.4 Connectivity Management
A.4.2 Host Group Management
A.4.2.1 Add FC/FCoE Host Group
For details about this function, refer to
For the factory default settings for this function, refer to
●
Host Group Setting
• Host Group Name
Description
Input condition/
Display contents
• Host Response
Description
Input condition/
Display contents
The LUNs that can be recognized from the host are determined by the "LUN Addressing" settings and the "LUN
Expand Mode (Peripheral Device Addressing)" settings for the host response. When a host that has the host affinity
setting is added to a new host group, check the LUN setting state. If a LUN that is LUN#256 onward is used for the
host, the relevant host cannot be added to a host group with "256 LUN" for the host response. Refer to
responses and recognizable LUNs" (page 818)
"4.2.1 Add FC/FCoE Host Group" (page
Specify the host group name.
An existing host group name cannot be used. Refer to
hosts" (page 1053) for details.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
for details.
817
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
365).
"Appendix B Add FC/FCoE Host Group" (page
"Naming conventions for adding
993).
"Host
P2X0-1270-13ENZ0