Fujitsu ETERNUS DX60 S3 User Manual page 947

Appendix A Parameter List
A.7 Advanced Copy Management
• Password
Description
Input condition/
Display contents
●
Operation Method Selection
• Operation Method
Description
Input condition/
Display contents
●
Storage System Information File Selection
• Storage System Information File
Description
Input condition/
Display contents
●
Operation Method Selection
• Operation Method
Description
Input condition/
Display contents
Input the password to access the iSCSI port (can be omitted).
Make sure to set the user name and password together. The entry is displayed with "*" or
similar characters. If not specified, the field is blank.
12 - 100 alphanumeric characters and symbols
Select whether to continue the storage system registration.
•
Finish of registration by file reading
•
Registration from file
When selecting "Registration from file", specify a file in the "Storage System
Information File Selection" field. When 128 storage systems are already registered,
"Registration from file" cannot be selected.
Input the location where the device information file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
•
Click the [Browse...] button to specify the location
•
Directly input the location
Select whether to continue the storage system information registration.
•
Registration by manual operation
When selecting "Registration by manual operation", specify parameters in the
"Storage System Information Setting" field. When 128 storage systems are already
registered, "Registration by manual operation" cannot be selected.
•
Finish of registration by manual operation
947
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0