Connection To Multiple Servers; Figure 3.3 Direct Fc-Al Connection, A Multiple Server Connection, A Shared Library, And Tape Drives That Are Not Shared - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Connections
3.2 Direct Connection to the Server
3.2.2

Connection to Multiple Servers

■ Tape library shared but not drives
The following figure shows an example of zoning when the LT260 is shared by two servers. In this case, all the
servers use the same backup software, and the LT260 is shared by the functions of this backup software.
However, the drives are not shared but individually belong to each server. Only one server controls the LT260
controller.
Figure 3.3 Direct FC-AL connection, a multiple server connection, a shared library, and tape drives that are
not shared
Server
Backup software
LT260
FC cable
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Server
Backup software
Controller
37
Copyright 2018 FUJITSU LIMITED P3AM-8782-06ENZ0