Chapter 3 Volume Management
3.19 Snapshot Management for NAS Volumes
■
Snapshot setting modification
Procedure
1
Select which NAS user volumes to set Snapshot for and click [Set Snapshot] in [Action].
2
Input the Snapshot information.
The main setting items are as follows.
●
Snapshot Setting
•
Number of Generations
•
Schedule
•
If the number of generations is reduced when changing the settings, a warning message appears.
Check the parameter settings.
•
If an error screen appears under the following conditions, check the parameter settings.
-
-
-
3
Click the [Set] button.
A confirmation screen appears.
4
Click the [OK] button.
Setting of the Snapshot starts.
5
Click the [Done] button to return to the [Snapshot] screen.
The total for the "Number of Generations" exceeds the maximum number for each model
SDVs for additional generations cannot be created (the maximum number of volumes has
already been created)
SDVs for additional generations cannot be created (insufficient capacity)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
331
End of procedure
P2X0-1270-13ENZ0