Fujitsu ETERNUS DX60 S3 User Manual page 310

Chapter 3 Volume Management
3.9 Start RAID Migration
• Select RAID Group Information
When changing the number of concatenations for a WSV, select the same "Drive Type", "RAID
Level", "Number of Member Drives", and "Stripe Depth" as the migration source WSV. Refer to
"Remarks" in
check the specifications of an existing RAID group.
-
-
-
3
Click the [Select RAID Groups] button.
 The [Select RAID Groups screen] screen appears.
4
Select the RAID group that is to be concatenated (multiple selections can be made).
The main setting item is as follows.
●
Select RAID Groups
• Checkbox to select RAID groups
• When increasing the number of concatenations for a WSV, select all of the existing RAID groups for
concatenation and the new RAID groups. When reducing the number of concatenations for a WSV,
select the RAID groups that will remain for concatenation from the existing RAID group list. For
details, refer to "Remarks" in
• When the drive type is "Online SED", "Nearline SED", or "SSD SED", setting the same "Encryption"
settings (the set state of the key group) is recommended for all of the RAID groups that configure
the WSV.
"When the migration destination volume is "WSV"" (page 308)
Drive Type
RAID Level
Number of Member Drives
"When the migration destination volume is "WSV"" (page
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
310
for the procedure to
308).
P2X0-1270-13ENZ0