Fujitsu ETERNUS DX60 S3 User Manual page 49

Chapter 1 System Management
1.4 System Management
■ For the other models
The main setting items are as follows.
●
Power Control by External Device
• RCIL
• Auto Power
• Power Resume
●
PWC Connection Settings
• Connection CM (for ETERNUS DX models other than the ETERNUS DX8700 S3/DX8900 S3)
• Connection SVC (for the ETERNUS DX8700 S3/DX8900 S3)
• Delay until Shutdown
• Set management unit interface
• Power Failure Signal
• Low Battery Signal
• UPS Shutdown Signal
3
Click the [Set] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Setting of the power management starts.
5
Click the [Done] button to return to the [System Settings] screen.
49
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0