Fujitsu ETERNUS DX60 S3 User Manual page 108

Disk storage systems
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 1 System Management
1.8 Network Management
The following IP addresses cannot be specified:
Link local addresses for which all of the values for the low 64-bit are "0"
Connect IP addresses (*1) for which the first 3-bit are not "001" or the first 7-bit are not "1111110"
*1:
The first 64-bit of the gateway is "fe80::" and all of the values for low 64-bit are "0"
Network addresses for which the first 3-bit of the gateway are "001"
Network addresses for which the first 7-bit of the gateway are "1111110"
DNS server IP addresses for which the first 3-bit are not "001" or the first 7-bit are not "1111110"
■ Supplementary Information
-
When accessing of the ETERNUS DX from a different subnetwork is not allowed
Specify "IP Address" and "Subnet Mask" of the ETERNUS DX.
Only accessing from the same subnetwork is allowed.
-
When accessing of the ETERNUS DX from a different subnetwork is allowed (*1)
Specify "Gateway" and "Allowable IP Address ("IP Address" (or the network address) and "Subnet
Mask")".
*1:
Allowing access from a different subnetwork is required when using ETERNUS Web GUI or ETERNUS CLI of PCs
in a different network to log in to the ETERNUS DX. Allowing access from a different subnetwork is also
required when using Systemwalker Centric Manager or SNMP Manager that is connected to a different
subnetwork to monitor the ETERNUS DX.
[Example] Allowable IP Address (for IPv4)
When accessing of the ETERNUS DX from a specific client outside the subnetwork is allowed, specify
"IP Address" and "Subnet Mask".
IP Address: 10.20.30.40
Subnet Mask: 255.255.255.255
When accessing of the ETERNUS DX from a specific subnetwork outside the subnetwork is allowed,
specify "Network Address" and "Subnet Mask".
IP Address: 10.20.30.0
Subnet Mask: 255.255.255.0
For IPv6, "IP Address" corresponds to "Connect IP Address", and "Subnet Mask" corresponds to "Length of
Subnet Prefix".
The connect IP address indicates a "global address", "unique local address", or "6to4 address".
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
108
P2X0-1270-13ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents